FECo PerfPoD™ Configurations and Pricing
The tables below show the different models, starting with the most basic one. In the last three columns are the prices of the optional parts needed to perform plate, pipe or plate and pipe tests. These are suggestions only. If a box in the column is open, it means that the part in the left column can be added. If there is more than one option for the part, then the price for the added part would take the place of the listed optional part price. If the box in a column is listed as NA, then the part on the left cannot be added or substituted into that particular model.
Each part has an ordering code. Parts codes that are underlined can be viewed in the column to the left by clicking on the code. The part will be in the top left corner.
The suggested configurations are shown below. To substitute a part, subtract the Part Code for the undesired part from the Model Code and add the Part Code for the desired part. For example, the Model Code for a Model WMB-PIP with an 8 Ft. Tall Post would be WMB-PIP-P6+P8. The price in the table will not change, but give us that new code and we will quote it to you.
Wall Mount – Basic (WMB)
|
||
|
||
|
Wall Mount – Swivel (WMS)
|
||
|
Floor Mount – Basic (FMB)
|
||
|
||
|
Floor Mount – Swivel (FMS)
|
||
|
Accessories
Free Standing Model |
Any of the FLOOR MOUNT Models above can be converted to a FREESTANDING MODEL by adding the Front Leg Part Code, FL1, to the Floor Model Code as described at the top of the page.
Add Front Leg, Code FL1
$223.40
|
Mobile Model |
Any of the FLOOR MOUNT Models above can be converted to a MOBIL MODEL by adding the Front Leg Part Code, FL1, and the Caster Code, C1, to the Floor Model Code as described at the top of the page.
Add Front Leg, Code FL1, plus (4) Casters and a Riser Block, Code C1 (FL1 + C1)
$372.40
|
Pipe Tacking Clamp |
The 2″ Pipe Tacking Fixture, PTC2, will fit onto either Pipe Fixture, PIF2 or PIF26, but the 2 – 6″ Pipe Tacking Fixture, PTC26, is intended for use with the Pipe Fixture, PIF26, only.
2″ Pipe Tacking Clamp, PTC2
$303.33
2-6″ Pipe Tacking Clamp, PTC26
$342.33
|
Open Root Backing Fixture |
The Open Root Backing Fixture, ORBF, is intended for use with the Plate Fixture, PLF1, only. It includes a replaceable, non-contact, copper chill bar.
Open Root Backing Fixture, ORBF
$691.33
|
Open Root Purge Insert |
The copper Open Root Purge Insert, ORPI, can be used with the Open Root Backing Fixture, ORBF, by inserting it in place of the copper chill bar. It includes fittings for a 1/4″ hose.
Open Root Purge Insert, ORPI
$403.00
|
Purge Caps |
Purge Caps are available for all nominal pipe sizes from 2 to 6-inch diameter. They include a vent valve and a handle. Please call for sizes not shown.
2″ Purge Cap, PC2
$95.00
“Super Coupon”® Purge Cap, PC2.75
$96.67
6″ Purge Cap, PC6
$129.33
|
Purge Sight Glass Caps – Small |
Purge Sight Glass Caps are available for all nominal pipe sizes from 2 to 3-1/2 inch diameter. They include a vent valve and a clear glass window. Please call for sizes not shown.
2″ Purge Sight Glass Cap, PSGC2
$267.67
“Super Coupon”® Purge Sight Glass Cap, PSGC2.75
$319.33
|
Purge Sight Glass Caps – Large |
Purge Sight Glass Caps are available for all nominal pipe sizes from 4 to 6-inch diameter. They include a vent valve and a clear glass window. Please call for sizes not shown.
6″ Purge Sight Glass Cap, PSGC6
$231.67
|
Post
Foot
Wall Bracket
Pipe Adapter
Support Arm
Plate Fixture
Pipe Fixture
Table
Winch Kit
Total Price for WMB-PL Configuration $1335.05
Total Price for WMB-PIP Configuration $1004.25
Total Price for WMB-PL/PIP Configuration $1645.22
California Residents – Click here for the Proposition 65 Warning
Send mail tosales@fischerengr.comwith questions or comments about these services.